Eaton PowerXL DM1 Series - Page 6

4
Step 2 - PowerXL DM1 connection process to PowerXpert inControl PC tool
POWERXL DM1 SERIES ADJUSTABLE FREQUENCY DRIVES PUB53696—August 2020 www.eaton.com
Click on the green “+” next to the communication protocol
or right click on the Network Name and select Add. Follow
the steps to add the desired network.
Figure 5. Adding the desired network.
ote: N If the modbus serial DTM is added an additional
window will pop up to set communication protocol
settings for the communication adapter.