Eaton REC Series - Aisle Containment Step 2: Component Identification

18
©2015 Eaton Corporation
All rights reserved
REC Series Enclosure Installation Guide _issue 4
Installation Guide
 Step – 2
Identify components and
fixings detailed in table
below and refer to image
right.
13
12
Doors viewed from inside
Master Door
Slave Door
7
1
2
3
4
5
6
8
7
9
9
10
11
ITEM # DESCRIPTION QTY
1 FRAME UPRIGHT LEFT 1
2 FRAME UPRIGHT RIGHT 1
3 CROSS BEAM 1
4 TOP PANEL 42U 1
5 TOP PANEL 47U 1
6 BACK FILL PANEL (USED WITH 47U ONLY) 1
7 SCREW M6 x 16mm 12
8 CAGE NUT M6 2
9 HINGES 4
10 SCREW M5 X 8mm FOR HINGES 16
11 CLAMP PLATE 4
12 BRUSH (FOR DOOR BOTTOMS) 2
13 DOOR (PAIR) 1