Eaton REC Series - Side Panel Installation and Removal; Side Panel Removal Process; Side Panel Reinstallation Process

9
©2015 Eaton Corporation
All rights reserved
REC Series Enclosure Installation Guide _issue 4
Installation Guide
7. SIDE PANEL
Removal of side panel
1. Unlock the side panel with the key supplied (Fig 1).
2. Tilt the panel to clear the upper flange.
3. Lift the panel upwards to clear two locating pins (Fig 2).
Reinstall side panel
1. Align the two holes on the bottom of the side panel with the two pins on the enclosure
frame. (Fig 2)
2. Then lower the side panel on to the pins.
3. Lock the side panel with the key supplied (Fig 1).