55
PTO Operation
Endurant Countershaft PTO Operation
Stationary PTO Operation
The transmission countershaft PTO is used in this application.
To engage the PTO for stationary operation perform the following steps:
1. Apply the parking brake.
2. Depress the service brake.
3. PTO engagement must be made from neutral
4. Select “N” on the Shift Control.
5. Engage the PTO.
6. Release the service brake to engage the clutch and power the PTO.
Mobile PTO Operation
The Transmission countershaft PTO is used in this application and provides limited mobile operation in 2nd & R2 only.
To engage the PTO for mobile operation perform the following steps:
1. Apply the parking brake.
2. Depress the service brake.
3. PTO engagement must be made from neutral
4. Select "N" on the Shift Control.
5. Engage the PTO
6. Release the service brake to engage the clutch and power the PTO.
7. Select “D”, “MANUAL”, “Neutral” or, “Reverse”, as required for vehicle movement.
8. Raise the engine speed as required to move vehicle / operate PTO.
To Next Page
Loading...