64
Inertia Brake
Inertia Brake
4. Recheck for leaks.
Final Check
1. Make sure all bolts are properly tightened.
2. Make sure the oil supply line and fittings are properly
tightened.
3. Make sure transmission is properly filled with
lubricant.
4. Make sure harness is connected and properly secured.
5. Look for leaks and repair as necessary.
6. Check the inertia brake for significant clearance to prevent contacting
tanks, brackets, frame rails, exhaust, or any part
of the vehicle. If there is contact, damage to the inertia brake could occur.
7. If a PTO is installed, instruct driver on PTO operation with an
Ultrashift transmission. (Information can be found in the
transmission's Driver Manual (TRDR0940))
To Next Page
Loading...