Eaton WaveLinx series - Wireless Area Controller Rear Panel; RESET Button; PAIR Button

6
EATON IB053008EN Installation instructions
WaveLinx Wireless Area Controller (WAC)
LED Color On Off Blink Fast Blink
WAN Green Connection to
OpenADR or 3rd
party
Normal Communications
from 3rd party
LAN Green Connected to
building LAN and
received IP address
No connection or
IP address from
building LAN
Communications
from LAN.
During internal
webpage setup
WiFi Blue Connected to
building LAN and
received IP address
No connection or
IP address from
building LAN
Communications
from LAN.
During internal
webpage setup
When login UN/PW
are reset
PAN Blue Future functionality Future functionality Future functionality Future functionality
802.15.4 Blue WaveLinx network is
formed
No WaveLinx devices
are paired
During Construction
Grouping and
WaveLinx
Communications
When WAC is set to
Factory Defaults
Eaton Blue WAC is powered and
running
WAC has no PoE
connection
Wireless Area Controller rear panel

Ethernet Port for power in and connection to building LAN for communications.
 PoE is required to supply power to the device
 PoE port does not supply power out to other devices

RESET Button
 Resets the Wireless Area Controller, does not impact settings

PAIR Button
 Construction Group
 Removing devices
 Reset login UN/PW
 Factory Defaults