119
WaveLinx User Manual
www.eaton.com/wavelinx
Manually Updating WaveLinx Device Firmware
To manually update WaveLinx device firmware:
Step 1: Establish a connection from the computer and the Wireless Area Controller as the administrator user.
Step 2: Next, navigate to the firmware page. Select the option to get all devices. When prompted, enter the administrator username and
password to log in to the lighting engine.
Firmware screen
Select upgrade devices
Log in using the administrator
username and password
Step 3: Next, review the available firmware list against the connected device current firmware. If any device requires updates, select the
start update option.
Review firmware
updates available
Select the option to
start the update
Review firmware
updates available
To Next Page
Loading...
