Eaton WaveLinx - Page 44

To Next Page

To Previous Page

WaveLinx User Manual

www.eaton.com/wavelinx

Step 3: In the area screen, select the desired zone.

Select zone to modify

Step 4: In the zone screen, select the pencil icon in the upper-right corner to open the edit function.

Select the pencil

icon to edit the zone

Main Page

Table of Contents2
Becoming Familiar with Wavelinx System Components5
Bringing the System Online9
Step 1: Confirming Device Installation9
Step 2: Completing the Initial Construction Grouping11
Using the Mobile Application to Pair Devices16
Operation of Devices Within the Construction Grouping17
Step 3: Connecting to the Mobile Application as the Administrator User18
Mobile Application Basic Familiarity21
Step 4: Organizing Devices into Controlled Areas and Zones27
Automatic Code Commissioning Operation34
Using the Wavelinx Mobile Application for Personal Control35
Connecting with the Mobile Application as the Default Personal Control User35
Assign a Favorite Area for Personal Control Users36
Control the Lighting as a Personal Control User37
Customizing the Automatic Code Commissioning Programming38
Modifying Names of Areas, Zones and Devices38
Modifying Scene Response40
Modifying Zone Response43
Modifying Minimum and Maximum Levels (High and Low End Trims)43
Modifying Zone Operational Mode45
Modifying Wallstation Button Response48
Standard Wallstation Default Button Response48
Battery Powered Wallstation Default Button Response49
Changing Default Button Response50
Copying Wallstation Programming to Other Wallstations53
Additional Wallstation Information56
Modifying Occupancy Sensor Response57
Adjusting Occupancy Set Response and Controlled Zones57
Viewing and Adjusting Individual Sensor Settings61
Defining Additional Occupancy Sets62
Associating Occupancy Sets for Overlapping or Cascading Control66
Deleting Occupancy Sets70
Modifying Light Levels for Daylight Sensors71
Modifying Closed Loop Daylighting Control72
Configuring Open Loop Daylighting Control81
Adding Schedule Events to the Control Strategy91
Basic Schedule Event Screen Information95
Modifying and Testing Demand Response Behavior95
Modifying Demand Response Behavior96
Testing Demand Response97
Performing Administrator Tasks99
Logging into the Wireless Area Controller Webpages100
Setting the System Location, Time, Date and Time Zone102
Managing User Accounts and Passwords105
Modifying Existing User Accounts and Passwords105
Adding a New User Account106
Deleting a User Account107
Using the Backup and Restore User Accounts Option108
Restoring User Accounts from a Backup110
Using the Mobile Application to Change Passwords111
Renaming the Wireless Area Controller112
Performing a System Backup112
Performing a System Restore114
Viewing Disclaimers and End User License Agreements116
Viewing and Updating Firmware of the Wireless Area Controller and Wavelinx Devices116
Viewing Firmware of the Wireless Area Controller116
Updating the Firmware/Software of the Wireless Area Controller117
Updating the Firmware of Wavelinx Devices118
Advanced Network Administration121
Changing Wi-Fi Access Point Settings121
Changing Wi-Fi Settings122
Changing Ethernet Settings123
Changing DNS Settings123
Custom Certificates123
Rebooting the Wireless Area Controller124
Viewing the Mobile Application Version124
Updating the Mobile Application125
Replacing and Syncing Devices Using the Mobile Application125
Using the Wireless Area Controller PAIR Button Advanced Functionality130
Common Questions131

Eaton WaveLinx - Page 44

Table of Contents

Related product manuals