6 In-/output configuration and parameterization
6.2 Interrupt processing
96 Modular PLCs XControl: XC-104-…, XC-204-…, XC-303-… 01/23 MN050005EN Eaton.com
Figure 70: PLC and Task configuration
▶ Changeover to the PLC configuration and assign input I0.4 (L ￫ H edge)
e.g. the interrupt source "Interrupt - rising edge" from the drop-down
menu.
Figure 71: allocation I0.5 ￫ interrupt source
▶ Change over to the Task configuration and open the "System events"
folder.
To Next Page
Loading...
