Eaton XN300 - 2.5 Potential relationship between the components

2 Installation
2.2 Removing the XN300 slice modules
23 XN300 slice modules 02/24 MN050002EN Eaton.com
 Disengage the locking tabs between the slice modules by pulling on the
front cover (blue). The front cover's stay-put function will indicate that
the locking tabs have been disengaged.
Figure 9: Disengaging the front cover
 Once the locking tabs have been disengaged, you can separate the slice
modules from each other.
Figure 10: Separating the XN300 slice modules from the system block
￫
The gateway's front cover is non-detachable and cannot be
removed.
4
4
5