EAW CXA240 - 11. PRODUCT SPECIFICATIONS; Performance Specifications; Input;Output and Control Specs; Physical Dimensions and Warranty

10 – CXA240
CXA240 – 11
8. SPECIFICATIONS
Performance
Amplier Power: 240 W, nominal, 330 W peak
Frequency Response: 50 Hz–18 kHz ± 3 dB
Distortion: < 1 % THD at 1 kHz nominal power
Noise: >70 dB
Audio Inputs
Input Type: Two balanced/unbalanced combination 1/4-inch
TRS/TS and XLR connectors
Two unbalanced RCA inputs
Input Sensitivity: 1 V, (1.4 V for RCA)
Impedance: 10 kΩ
Input Level Adjustment: -12 dB to 0 dB (1 V)
Audio Outputs
Number of Channels: One
Low Impedance: 4 Ω
Constant Voltage: 70 V, 100 V screw-terminal connectors
(20.4 Ω, 41.8 Ω)
Controls
Front Panel: Power switch
Rear Panel: Main Level Control, 24 VDC on/off switch
AC Power
Power supply: 115/230 VAC (±5%), 50/60 Hz
24 VDC (battery)
Power Consumption: 486 W
Physical
Dimensions (HxWxD): 6.1 in/156 mm x 19.0 in/483 mm x 14.5 in/368 mm
(Including Feet)
Weight: 34.1 lb/15.5 kg
Warranty
5 years, parts and labor
DISCLAIMER
EAW Commercial continually engages in research related
to product improvement, new materials, and production
methods. Design renements are introduced into existing
products without notice as a routine expression of that
philosophy. For this reason, any current EAW Commercial
product may differ in some respect from its published
description, but will always equal or exceed the original design
specications unless otherwise stated.
“EAW Commercial” is a trademark of LOUD Technologies
Inc. All other brand names mentioned are trademarks or
registered trademarks of their respective holders, and are
hereby acknowledged.