Eberhard Manufacturing Company
POWER-UP Locking System with Built-In Alarm
Supplied Hardware
Options:
• 2-16720-10 Expansion Compartment Wire Harness with Dome Light Feature – Qty. (1)
Adds (2) actuators per side to 2-16720-7 compartment Wire Harness
* Does not require 2-16720-8 Expansion Relay Harness with Dome Light Feature
Provides for a total of (5) actuators for road side – (6) actuators for curb side total
• 2-16720-10X Wire Harness for Door Jamb Switch – Qty. (1)
Provides a negative trigger input for an additional (4) door jamb switches to the control module
* Requires 2-16720-7X Wire Harness for Door Jamb Switch
• 16746-U Power 3 Way Toggle Switch Kit W/Connectors – Qty. (1)
Provides a non-illuminated toggle switch for the compartment door locks to a cab without
an OEM power locking system
Includes: 3 Way Toggle Switch, non-illuminated – Qty. (1)
Trim Plate – Qty. (1)
Wire Harness – Qty. (1)
Butt Splice Connector – Qty. (2)
Insulated Ring Terminal for #10 Stud – Qty. (1)
• 1-16746-U Power 3 Way Toggle Switch Kit W/Connectors – Qty. (1)
Provides an illuminated toggle switch for the compartment door locks to a cab without
an OEM power locking system
Includes: 3 Way Toggle Switch, illuminated – Qty. (1)
Trim Plate – Qty. (1)
Wire Harness – Qty. (1)
Butt Splice Connector – Qty. (2)
Insulated Ring Terminal for #10 Stud – Qty. (2)
Rev. 9-11-2019 Page 3 of 36
To Next Page
Loading...