Chengdu Ebyte Electronic Technology Co.,Ltd.
E18-DTU(Z27-ETH) User Manual
Copyright ©2023
，成都亿佰特电子科技有限公司
Note: After the device IP is modified, the configuration page entry will change the modified IP address, here is 192.168.3.10, if the
device IP is forgotten, we can restore the network parameters through the Reload button.
（3）The progress bar is displayed to 100%, indicating that the parameter configuration was submitted successfully。
Configure the network parameters of the terminal device
（1）Configure the terminal device network, connect our device to the computer, open a browser, type 192.168.3.7 in the URL input
box, click Enter, come to the login page, enter the user name: admin, password: admin, click login
。
（2）Go to the configuration page, modify the device IP to 192.168.3.17, keep the remaining parameters as default, and click Submit。
To Next Page
Loading...
Need help?
General
