Chengdu Ebyte Electronic Technology Co.,Ltd.
E18-DTU(Z27-ETH) User Manual
Copyright ©2023
，成都亿佰特电子科技有限公司
Coordinator device Router device
4.4.5 Data transmission between incoming nodes
The coordinator of the ZigBee 3.0 data transmission module needs to take on the network management function, and if it works in
transparent mode, it may miss important messages related to network changes. Therefore, we recommend that the coordinator work in HEX
command configuration mode when the number of nodes entering the network is large, and assign the connecting nodes to transfer data to
each other。
（
1
）
Click "Enter Parameter Configuration" in the host computer interface, and the coordinator device and router device return to the
configuration mode. After the coordinator returns to the configuration mode, it receives a heartbeat packet reported by the network connection
device cycle
。
Coordinator device Router device
（
2
）
The coordinator adds several more incoming nodes, sets a new device as "endpoint", and clicks "Write Parameters" → "Restart" to join
To Next Page
Loading...
