Chengdu Ebyte Electronic Technology Co.,Ltd. EBT3001 User Manual
Copyright ©2012–2022，Chengdu Ebyte Electronic Technology Co.,Ltd.
4．Product Function
4.1 Introduction to basic functions
4.1.1 Web page configuration
The device has a built-in web server, which is convenient for users to set and query parameters through web pages.
The port of the web server can be customized (2-65535), default: 80
Operation method (Microsoft Edge version 94.0.992.50 is an example, it is recommended to use Google kernel browser,
IE kernel browser is not supported):
Step 1: Open the browser, enter the IP address of the device in the address bar, for example 192.168.3.7 (the IP
address and the computer need to keep the same network segment), if you forget the IP of the machine, you can query it
through AT commands and configuration software
Step 2: The webpage pops up the main interface, and you can query and set relevant parameters;
Step 3: Click Submit to save the configuration parameters after entering the correct key. The factory default key is:
To Next Page
Loading...
Need help?
General
