Ebyte ME31-XXAX0060 - Configuration Software; Acquisition and Control

Chengdu Ebyte Electronic Technology Co.,Ltd. ME31-XXAX0060_UserManual_EN
Copyright ©2012–2023, Chengdu Ebyte Electronic Technology Co.,Ltd
25
V. Configuration Software
5.1. Acquisition and Control
Step 1: Connect the device to the configuration software.
（1）You can configure the device by selecting the interface (serial port/network port); if you choose the network
port, you must first select the network card and then search for the device.
（2）If you choose a serial port, you need to select the corresponding serial port number, and the same baud rate,
data bit, stop bit, parity bit and address segment search range as the device, and then search.
Step 2: Select the corresponding device.