Chengdu Ebyte Electronic Technology Co.,Ltd. ME31-XXAX0060_UserManual_EN
Copyright ©2012–2023, Chengdu Ebyte Electronic Technology Co.,Ltd
8
2.4 Control Testing
2.4.1 Modbus TCP control
Use the network assistant to control the first DO output of ME31-XXAX0060.
Other functions can be tested through the commands in the table below.
The device is in server mode, and the
computer connects to the device as a client.
Enter the IP address of the device.
Enter the port number of the device.
Select HEX display to facilitate observation
of data.
Select HEX to send
1: Transaction ID
2: Protocol identifier
3: Length
4: Modbus address
5: Function code
6: First address
7: Opcode
To Next Page
Loading...
