Chengdu Ebyte Electronic Technology Co.,Ltd. ME31-XXAX0060_UserManual_EN
Copyright ©2012–2023, Chengdu Ebyte Electronic Technology Co.,Ltd
26
Step 3: Click the device online to enter the IO monitoring. The following is the IO monitoring screen display.
5.2. Parameter configuration interface
Step 1: Connect the device refer to "Acquisition and Control".
Step 2: You can configure device parameters, network parameters, DI parameters, AI parameters, DO parameters,
and AO parameters (for example: if the device has no AO function, the AO parameters cannot be configured)
To Next Page
Loading...
