EC-80320 User’s Manual
- 22 -
Chapter 4 Install and Replace the Roll Paper
The printer can install the paper conveniently, which should be 80mm width. How to deal with the
paper will be explained in details in this chapter
4.1 Paper Installed Steps
1. Push the cover open lever, open the cover.
2. Insert the paper roll as shown below（Be sure to note the correct direction that the paper comes
off the roll）.
1. Don’t touch the thermal head after printing to avoid being burned.
2. Don’t pull the paper moving directly with your hand.
！ Note
Fig4-2 Insert the paper roll
Fig 4-1 Open the cover
To Next Page
Loading...