ECD V-M.O.L.E. - Step 1: Setup Instrument

4
1
10
OPERATION - SETUP INSTRUMENT
Step 1: Setup Instrument
1. Double-click the M.O.L.E.
®
MAP application icon to
start the software.
2. Connect the M.O.L.E.
®
Thermal Profiler to a computer.
3. Make sure the M.O.L.E.
®
Power Pack battery is fully
charged. When a M.O.L.E.
®
Thermal Profiler is
selected, the software status bar displays the current
battery voltage.
4. Set an Environment. Either open an existing
Environment Folder or create a new one.