ECD V-M.O.L.E. User Manual

QUICK REFERENCE GUIDE

ECD V-M.O.L.E. Specifications

General

Brand	ECD
Model	V-M.O.L.E.
Category	Measuring Instruments
Language	English

Summary

Welcome to the V-M.O.L.E. Quick Reference Guide

Equipment Features and Functions Overview

Equipment Status Activity LED Indicators

Setup: Charging the Power Pack

Setup: Software Installation Procedure

Setup: Establishing Communications

Operation Introduction and Overview

Operation: Setting Up the Instrument

Select Instrument and Initial Setup

Select the M.O.L.E. profiler and initiate the setup wizard.

Instrument Configuration Details

Set instrument name, sensor platform, and sensor type.

Assembly Information Input

Input assembly details, size, and sensor locations.

Verify Instrument Status

Check profiler health and complete setup.

Operation: Data Collection Process

Attaching Sensors and Preparation

Connect thermocouple sensors to the test product and prepare for data recording.

Running the Data Collection Process

Operate the profiler, place it in the thermal barrier, and run it through the process.

Post-Process Handling and Disconnection

Remove sensors, stop logging, cool the profiler, and disconnect.

Operation: Downloading Data

Instrument Selection for Data Download

Select the correct profiler and proceed to read the data.

Reading and Saving Data Runs

Select data runs, finish the wizard, and save the downloaded data file.