ECG 32FSL231 - Media Playback Via USB Input

English English
16
While the search is in progress, a message will appear asking if you want to sort channels by LCN*. Select Yes
and press OK to conrm.
*LCN (Logical Channel Number) is a feature that allows channels to be automatically arranged according
to their numbers in the order specied by the service provider
Notes:
• To search for M7 channels after the First Installation, you must perform the First Installation again. Or press
the Menu button and enter Settings > Setup > Automatic programme search > Satellite. Then follow
the same steps outlined above in the satellite section.
• Do not turn o the TV while the rst installation is in progress. Note that some options may not be available
depending on your choice of country.
Media Playback via USB input
You can connect a 2.5" and 3.5" inch external hard drive (HDD with external power supply) or USB memory to
the TV's side USB input.
IMPORTANT! Back up your les on the storage device before connecting it to your TV. The manufacturer is not
responsible for any damage or loss of data. Some types of USB devices (e.g. MP3 players) or USB hard drives/
memory cards may not be compatible with this TV. The TV supports FAT32 and NTFS disk format.
Wait a moment before each connection and disconnection, as the player may still be reading les. Failure to
follow this instruction may cause physical damage to the USB player and USB device. Do not remove the USB
memory while the le is playing.
USB hub can be used. Disks with external power supply are recommended. If you are connecting a USB hard
drive, plug it in directly.
Note: When viewing image les, the Media Browser menu can only display 1000 images stored on the
connected USB device.
Media Browser
You can play music and movies and view photos stored on a USB drive by plugging it into your TV. Connect the
USB drive to one of the USB inputs located on the side of the TV.
When you connect a USB storage device to your TV, the Sources bar will appear with USBx highlighted. Press
OK, the Media Viewer menu will appear on the screen Select the le of your choice, press OK to visualize or play
it. You can access the contents of a connected USB device at any time later from the Sources menu. You can also
press the Source button on the remote control and then select a USB storage device from the list of sources.
Use the Settings window to set Media Viewer preferences. The Settings menu can be accessed via the
information bar that appears at the bottom of the screen when playing a video or audio le or viewing an
image le. If the info bar disappears, press the Infobutton, highlight the gear symbol located on the right
side of the info bar and press OK. Depending on the type of media le and the model of TV and its features,
Picture Settings, Audio Settings, Media Browser Settings and Optionsmay be available. The content of
these menus may vary depending on the type of le you are currently opening. Only the Audio Settingsmenu
will be available while audio les are playing.
Operation in loop/mixed
Start playback and activate
All les in the list are played once in
their original order
Start playback and activate
The same le will play continuously (it
will repeat)
Start playback and activate
All les in the list are played once in
random order
Start playback and activate +
All les in the list are played back once
in the original order.