ECG 32FSL231 - Page 20

English English
20
Audio menu
Sound
Output
Sets the audio output preset. TV, S/PDIF, HDMI ARC, Headphone Only and Lineout options
will be available. There is no audio output except through the selected option and the
headphone jack.
If you connect an external amplier to the TV using the headphone jack, you can select
Lineout. If you have headphones connected to the TV, select Headphones only. Before using
headphones, please make sure that this menu item is set to Headphones Only. If it is set to
Lineout, the output from the headphone jack will be set to maximum and may damage your
hearing.
When HDMI ARC is selected, the CEC function is activated.
Note: Depending on the option you select, some items in the Sound menu will appear
greyed out and will not be available.
AVL (Au-
tomatic
Volume
Limiting)
Adjusts the sound to balance the output volume between programs.
If the Dolby Audio menu item is set to an option other than O the AVL setting options will
be changed. Options such as Auto, Night, Normal and O will be available. In Auto mode,
the TV automatically switches to Normal or Night mode according to the current time
information. If no time information is available, this function will always function as Normal.
When the TV switches to Night mode after setting this option to Auto for the rst time, an
information bar appears on the screen.
Please note that compared to Normal mode, Night mode provides more aggressive dynamic
compression control that is suitable for quiet environments.
Advanced
Settings
Equalizer Selects the equalizer mode. User settings can only be changed in User
mode.
Dynamic Bass Enables or disables Dynamic Bass.
Sound Mode You can select an audio mode (if the channel displayed supports it).
Digital audio
output
Sets the type of digital audio output.
Headphone
volume
Adjusts the volume of the headphones. This option will not be available
if the Audio Output option is not set to Lineout.
Before using the headphones, make sure the volume of the headphones
is set to a low level to avoid damaging your hearing.
Balance Adjusts the sound balance. This function is activated when Audio
Output is set to TV or Headphones Only. The Balance item adjusts the
balance level of the TV and headphone speakers.
Reset Restores some audio settings to factory defaults.
Oer Network
Connection method Disable the network connection or set the connection type to Wireless device.
Find wireless
networks
Start searching for wireless networks. This option is only available if the Network
Type is set to Wireless Device.
Disconnect To disconnect from the wireless network and delete the saved wireless network
prole (if previously saved), highlight this option and press OK. This option will not
be available if you are not connected to a wireless network. For more information,
see Connecting.
Press WPS on your
router
If your modem/router has the WPS function, you can connect to it directly using
this function. Highlight this option and press the OKbutton. To connect, press the
WPS button on your modem/router. This option is only available if the Network
Type is set to Wireless Device.