Echelon STRIDE-RCX - Page 28

28
Workout in APPs, the treadmill will run again.
Trouble shooting and maintenance
Treadmill
Item
Reason
Maintenance
Treadmill doesn’t
work
a no power
Plug into socket
b safety key isn’t in the
right position
Insert
the safety key
back to the safety key
socket
c
Open
circuit signal
system
Check the controller input and signal wire
d switch off
Place the power switch in the “
ON
”
position.
The running belt
does not run
smoothly.
a no enough lubrication
Use the Silicone oil
b running belt too tight
Adjust the running belt tension
Running belt slips
a running belt too loose
Adjust the running belt tension
Console
Item
Reason
Maintenance
System
doesn’t work
A
、
No power
Plug into socket,
p
lace the power switch in the
“ON”
position.
B
、
safety key isn’t in the right
position
Insert the safety key back to the safety key socket
C
、
transformer isn’t inserted
right, or transformer is
defected
Check and connect the transformer correctly,
or replace the transformer
D
、
Open
circuit
Check the system input and output terminal and
the communication lines
Stop suddenly
A
、
Safety key fall off
Insert
the safety key
back into safety key socket