Cut off the power when plan to fold the treadmill.
2、Unfolding
1. When unfolding the treadmill, you should choose one place where around 1m away from
the power socket, and the ground is flat without any barriers.
3、moving
First you need be sure following things before moving：
1：the power is off；
2：the plug has been pulled out from the socket；
3：the treadmill has been folded；
Then you can catch the end of treadmill with one hand, and catch the handlebar at the
same side with another hand, tilt 30~40°up to chest to move the treadmill slowly.
TREADMILL MAINTENANCE
Proper maintenance is very important to ensure a faultless and operational
condition of the treadmill. Improper maintenance can cause damage to the
treadmill or shorten the life of the product. All parts of the treadmill shall be
checked and tightened regularly. Worn out parts must be replaced immediately.
Lubrication
After the running belt has been used for a period of time, it must be lubricated with the
configured methyl silicone oil. Suggestion:
Using time less than 3 hours every week lubrication once every 5 months
Using time equal to 4-7 hours every week lubrication once every 2 months
Using time more than 7 hours every week lubrication once every month
No excessive lubrication. Note: the important factor of increase the lifetime for treadmill is
proper lubrication.
How to check if the running belt need lubrication: You can lift up the running belt and touch
the middle of back of running belt. If your hands are stained with silicone oil (something
damp), it means no need more silicone oil .
To Next Page
Loading...
