1
2620 SerieS Flex Drive ShaFt Kit
inStallation inStructionS
P/N 90206 For SrM-2620
P/n 90207 For SrM-2620t
Kit 90206 and 90207includes:
Part Number Description Qty
A556001760 Clutch Drum 1
61092255931 Main Pipe Fixture 1
90070100012 Drum Retaining Ring 1
C506000470 Flexible Drive Cable 1
P021051520 Gear Case Assy (90206 1.62 Sq Drive) 1
P021051360 Gear Case Assy (90207 2.07 Sq Drive) 1
DISASSEMBLY
1. Remove Spark Plug, and Air Filter Cover. Remove bottom and side
Cover by rotating up to disengage from Engine Cover hinge.
Note: Clip must be reused, do not deform original shape.
Cable and remove cable from carburetor bracket.
torx driver. Remove Engine Cover.
engine, then slide engine off Main Pipe assembly.
•
• Cupped Pliers
•
• 10mm Wrench
•
• Soft Mallet
• W-D 40
• Press
• Rubbing Alcohol
X7672340001
12/16
Remove
Remove
Clip
Flange
To Next Page
Need help?
General
