Echo Bear Cat CH922DH User Manual

28 9 INCH CHIPPER
Section
6 TROUBLESHOOTING
6.1 FLASH CODES FOR THE DIGITAL DISPLAY CONTROLLER
FREQUENCY CAUSE ACTION TO TAKE
GREEN
Solid
Chipper has reached required RPM
and forward feed is available
Machine ready for chipping
1/2 second on,
1/2 second off
Chipper has not reached chipping RPM
upon initial startup
Slowly increase RPM
1/2 second on,
1/2 second off
Chipper RPM dropped while chipping
Feed roller will automatically pause to bring RPM
back up
RED
Solid Knee bar was activated Hold Knee Bar Reset
Solid Battery voltage is low Charge battery. Check charging system.
YELLOW
Solid
Controller has detected an electrical
system fault
Use diagnostics screen information on controller or
see troubleshooting section in manual

Echo Bear Cat CH922DH Specifications

General

Brand	Echo
Model	Bear Cat CH922DH
Category	Chipper
Language	English