To Next PageTo Next PageWhat to do if there is no spark at the spark plug in my Echo Chainsaw?
If there's no spark at the plug of your Echo Chainsaw, it could be due to several reasons. Check the spark gap and adjust it to be between 0.6 and 0.7 mm. The plug might also be covered with carbon or fouled with fuel, in which case you should clean or replace it. If the spark plug is defective, replace it.
What to do if there is no fuel at the carburettor of my Echo Chainsaw?
If there is no fuel reaching the carburettor of your Echo Chainsaw, it could be due to a clogged fuel filter or fuel line; clean or replace the fuel filter, and clean the fuel line. If that doesn't solve the problem, consult your ECHO dealer, as the issue might be with the carburettor itself.
Why does my Echo Chainsaw engine run, then die or accelerate poorly?
If your Echo Chainsaw engine runs, but then dies or accelerates poorly, there are several potential causes. The air filter or fuel filter might be dirty, so try cleaning or replacing them. The fuel vent, cooling system, or exhaust port/silencer could be plugged, requiring cleaning. Also, the spark plug might need cleaning, adjustment, or replacement, and the carburetor may need adjustment.
What to do if there is no spark at the end of the plug wire on my Echo Chainsaw?
If there is no spark at the end of the plug wire of your Echo Chainsaw, first, ensure the ignition switch is turned on. If the switch is on and there's still no spark, there may be an electrical problem. In this case, it is recommended to ask your ECHO dealer for assistance.
Why is the silencer of my Echo CS-2700ES Chainsaw wet with fuel?
If the silencer of your Echo Chainsaw is wet with fuel, the fuel mixture may be too rich; open the choke. You may also need to clean or replace the air filter, or adjust the carburettor. For further assistance, consult your ECHO dealer.
What to do if my Echo Chainsaw engine does not crank?
If the engine of your Echo Chainsaw does not crank, this indicates an internal engine problem. It is recommended to ask your ECHO dealer for assistance.
Read instructions carefully for safe operation. Failure to do so could result in serious injury.
Explains safety decals and symbols used on the chain saw for proper identification and understanding.
Importance of reading manual and maintaining good physical/mental health for safe chainsaw operation.
Guidelines for wearing approved goggles, hearing protection, safety helmets, gloves, and footwear.
Details on fuel flammability, safe handling, storage, and refueling procedures to prevent fire.
Instructions for starting the engine safely, including moving away from fuel point and clearing work area.
Advice on operating in well-ventilated areas and safe transportation methods using the guide bar cover.
Explains kickback causes (tip contact, pinching) and how to prevent it by understanding rotational kickback.
Instructions on using two hands, maintaining a firm grip, avoiding overreaching, and cutting below chest height.
Recommendations to keep body warm, maintain circulation, take breaks, and consult a physician if symptoms occur.
Guidelines for operating a well-maintained machine, checking for damage, and ensuring the chain stops when the throttle trigger is released.
Instructions on tree felling, avoiding cutting on ladders, and stopping the engine before setting down the saw.
Guidelines for safe operation, using the saw only for wood products, and maintaining proper stance and footing.
Explains the chain brake's role, limitations, and factors affecting its performance like maintenance and proper handling.
Diagram identifying all components of the chainsaw with corresponding numbers for reference.
Provides detailed explanations for each numbered component of the chainsaw, from Operator's Manual to Safety Decal.
Step-by-step instructions for assembling the guide bar and chain onto the chainsaw, including safety warnings.
Detailed guide on how to properly tension the saw chain, including cautions about cold adjustments and wearing gloves.
Specifies fuel mixture ratios, recommended chain oil, and precautions for handling fuel and lubricants.
Explains the 'ES' START feature and provides crucial warnings about chain movement with the choke engaged.
Details on starting a warm engine, using the choke if necessary, and cautions about clutch engagement and chain rotation.
Instructions on using the throttle trigger, idle speed adjustment, and precautions regarding the throttle trigger lockout.
Procedures for stopping the engine safely and performing pre-cutting tests to ensure familiarity and a clear workspace.
Instructions for checking chain tension and performing a chain lubrication test to ensure proper function and prevent damage.
Step-by-step guide to test the chain brake function and release it, emphasizing safety checks before use.
Procedure for testing the automatic chain brake by simulating impact, with precautions to avoid damaging the chain.
Key reminders for practicing with the brake, ensuring its cleanliness, and avoiding testing in areas with petrol fumes.
Guidelines on operating the chainsaw as a one-man job, proper grip, and basic cutting techniques for effortless cuts.
Crucial warning to prevent kickback by ensuring the guide bar tip does not touch anything while the engine is running.
Detailed instructions on felling a tree, including making the notch, back cut, and using the hinge wood for directional fall.
Guidelines for safely removing branches and cutting logs into smaller pieces, including proper stance and footing.
Explains how wood tension and compression affect cutting, and provides cautions against misjudging forces and using the throttle latch for cutting.
Provides a comprehensive guide on maintenance areas, specific tasks, page references, and recommended intervals for before use and monthly checks.
Guides users through diagnosing and resolving common engine issues like hard starting, no start, or poor acceleration.
Instructions for adjusting the idle speed (T), low speed (L), and high speed (H) mixture screws on the carburetor for optimal performance.
Procedures for cleaning the air filter and checking the fuel system for leaks before each use.
Instructions for periodically checking, cleaning, or replacing the fuel filter and oil filter to ensure proper engine operation.
Guidance on cleaning, reversing the guide bar, and inspecting/replacing the sprocket for wear to prevent chain damage.
Instructions for adjusting the automatic oiler discharge volume and checking the spark plug gap and torque.
Information on the CDI ignition system and maintaining clean cylinder fins for proper engine cooling.
Detailed guide on how to sharpen the saw chain correctly using specific tools, emphasizing safety precautions.
Illustrates correct sharpening angles for cutters (top plate, side plate, cutting angle, depth gauge) and notes on specific chain models.
Details on adjusting depth control for chip thickness and lists factors that significantly increase the risk of kickback.
Instructions for safely storing the chainsaw for over 60 days, including fuel draining, cleaning, and proper storage location.
Steps for lubricating the cylinder during storage and notes on keeping the operator's manual for future reference or replacement.
Provides detailed specifications including dimensions, weight, engine type, cutting length, chain type, fuel capacity, and performance data.
Formal declaration by Kioritz Corporation confirming the chainsaw's compliance with relevant EC directives and standards.
Outlines warranty periods, conditions for claims, exclusions, and the importance of regular maintenance for warranty validity.
General
