EasyManuals Logo

Echo CS-620P User Manual

Echo CS-620P
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
13
CS-620P
HANDLING FUEL
Mixing Instructions -
1. Fill an approved fuel container with half of the
required amount of gasoline.
2. Add the proper amount of two-stroke oil to
gasoline.
3. Close container and shake to mix oil with
gasoline.
4. Add remaining gasoline, close fuel container,
and remix.
IMPORTANT
•Spilledfuelisaleadingcauseofhydrocarbon
emissions.
Some states may require the use of automatic
fuel shut-off containers to reduce fuel spillage.
•Storedfuelages.
Do not mix more fuel than you expect to use in
thirty (30) days, ninety (90) days when a fuel
stabilizer is added.
•Storedtwo-strokefuelmayseparate.
Always shake fuel container thoroughly before
each use.
After Use -
Do not store a unit with fuel in its tank.
Leaks can occur.
Return unused fuel to an approved fuel storage
container.
Storage -
Fuel storage laws vary by locality.
Contact your local government for the laws
affecting your area.
As a precaution, store fuel in an approved, airtight
container.
Store in a well-ventilated, unoccupied building,
away from sparks and flames.
DANGER
Fuel is very flammable. Use extreme care
when mixing, storing or handling or serious
personal injury may result.
•Useanapprovedfuelcontainer.
•Donotsmokenearfuel.
•Donotallowamesorsparksnearfuel.
•Fueltanks/cansmaybeunderpressure.
Always loosen fuel caps slowly allowing
pressure to equalize.
•Neverrefuelaunitwhentheengineishot!
•Neverrefuelaunitwiththeenginerunning.
•Donotllfueltanksindoors.
Alwaysllfueltanksoutdoorsoverbare
ground.
•Securelytightenfuelcapafterrefueling.
•Inspectforfuelleakage.
If fuel leakage is found, do not start or
operate unit until leakage is repaired.
•Moveatleast3m(10feet)fromrefueling
location before starting the engine.
Oil tank cap
CHAIN LUBRICANT
Proper lubrication of the chain while in operation
reduces friction between the chain and the guide
bar to a minimum and assures a longer service life.
• Usebarandchainoilofhighqualityforthis
purpose.
• Donotuseusedorreclaimedoiltoavoidvarious
oiler problems.
• UseECHObarandchainoil.
• Usebarandchainoilofthefollowinggrades:
SAE No. 30 ....... in summer
SAE No. 10 ....... in winter or when cutting
resinous trees
• Whenrefueling,alsorellchainoil.
Fuel tank cap
Cap indication
Oil/fuel tanks are indicated by the following
illustrations.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Echo CS-620P and is the answer not in the manual?

Echo CS-620P Specifications

General IconGeneral
Engine Displacement59.8 cc
Oil Tank Capacity300 ml
Weight6.2 kg
Chain Pitch3/8 in
Engine Power3.3 kW
Power Output4.4 bhp
Bar Length20 in
Bar Length Options16 in, 18 in, 20 in
Weight (without bar and chain)6.2 kg
Chain Gauge0.050 in
Oil Capacity300 ml

Related product manuals