To Next PageTo Next PageWhat to do if my Echo CS-620P engine cranks but has no spark at the plug?
If your Echo Chainsaw engine cranks but there's no spark at the plug, it could be due to an incorrect spark gap, carbon buildup, fuel fouling, or a defective spark plug. Adjust the gap to 0.6-0.7 mm (0.024 to 0.028 in.), clean or replace the plug to remove carbon or fuel, or replace the spark plug entirely.
What to do if my Echo CS-620P Chainsaw engine cranks but no fuel is reaching the carburetor?
If your Echo Chainsaw engine cranks but no fuel is reaching the carburetor, the fuel filter or fuel line might be clogged, or there could be an issue with the carburetor. Clean or replace the fuel filter, clean the fuel line.
What to do if my Echo Chainsaw engine cranks but the muffler is wet with fuel?
If the muffler of your Echo Chainsaw is wet with fuel while the engine cranks, the fuel mixture is likely too rich. Open the choke, clean or replace the air filter, or adjust the carburetor.
General| Engine Displacement | 59.8 cc |
|---|---|
| Oil Tank Capacity | 300 ml |
| Weight | 6.2 kg |
| Chain Pitch | 3/8 in |
| Engine Power | 3.3 kW |
| Power Output | 4.4 bhp |
| Bar Length | 20 in |
| Bar Length Options | 16 in, 18 in, 20 in |
| Weight (without bar and chain) | 6.2 kg |
| Chain Gauge | 0.050 in |
| Oil Capacity | 300 ml |
Explains kickback causes and how to prevent it.
Lists general safety measures for chain saw operation.
Shows safety decals found on the unit and their descriptions.
Covers vibration, cold, RSI, and hot weather safety measures.
Details required eye, hearing protection, and appropriate clothing/footwear.
Warns about hot components and safe handling.
Provides steps for installing the Kick Guard accessory.
Details how to install and remove the guide bar and saw chain.
Outlines fuel type, octane, and ethanol content recommendations.
Specifies the required standards for two-stroke oil.
Step-by-step guide for mixing fuel and oil.
Provides guidance on safe fuel storage practices.
Warns about the chain turning when the choke is active.
Advises on safe starting procedures and throttle use.
Step-by-step instructions for starting a cold engine.
Instructions for starting a warm engine.
Provides general cutting safety and technique advice.
Information on guide bar specifications and replacement.
Information on saw chain specifications and standards.
A table outlining maintenance tasks and their recommended intervals.
Details the tools and techniques for sharpening the saw chain.
How to adjust the depth gauge for proper chain cutting.
Details warranty coverage durations for residential, commercial, and rental applications.
