Echo DCS-5000 User Manual

DCS-5000
9992220570816
© 08/2021 ECHO Incorporated
Automatic Chain Brake
SAFETY
Kickback produced from the tip of the guide bar will trip the automatic chain
brake. To make sure that the automatic chain brake operates properly,
follow these steps:
1. Stop the motor.
2. Hold the saw with the guide bar approximately 35 cm (14 inches) above
a wooden surface. Right hand should hold the rear handle, and left hand
should hold the front handle.
3. Release the front handle and drop the end of the guide bar against the
wooden surface.
4. The impact should lock the chain brake.
When checking the operation of the automatic chain brake, use a soft
surface substance like wood to absorb the impact so the chain is not
damaged.

Echo DCS-5000 Specifications

General

Brand	Echo
Model	DCS-5000
Category	Chainsaw
Language	English