DCS-5000
9992220570822
© 08/2021 ECHO Incorporated
DESCRIPTION
4. Pull the chain around the bar by
hand. Loosen the tension adjuster
if you feel tight spots while rotating
chain on the bar by hand.
5. Assemble components in reverse order.
6. Keep chain properly tensioned at all times.
Note: All chains require frequent adjustments.
Tighten Sprocket Cover Nuts to 15 - 20 N•m (153 to 204 kgf•cm,
133-177 lbf•in). DO NOT over-tighten nut. Damage to saw can result.
To Next Page
Loading...
Need help?
General