EasyManuals Logo

Echo EG-10000 User Manual

Echo EG-10000
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
28
MAINTENANCE
1. Check the fuel (gasoline), engine oil and air cleaner.
2. Start engine.
3. With appliance such as lighting activated, run the engine for over
ten minutes.
4. Check the following items:
Engine running properly.
Adequate output.
Engine switch normally operated.
No leakage of engine oil and fuel (gasoline).
TRANSPORTING
When transporting the generator, make sure that the fuel (gasoline) is
drained from the tank.
WARNING
To prevent fuel spillage due to the vibration and
impact, never transport the generator with fuel
(gasoline) in the tank. Secure the tank cap.

leave the generator in an area exposed to direct
sunlight or high temperatures for a long period time.
Keep the fuel in an approved storage tank when transporting.
1. Turn the engine switch to the OFF position.
2. Turn fuel valve to the closed position.
3. Drain the fuel from the tank.
4. Tighten the tank cap.
CAUTION
DO NOT place any heavy objects on the generator.
Select and place the generator in the proper position of the transport
vehicle so that the generator will not move or fall down. Secure the
generator if necessary.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Echo EG-10000 and is the answer not in the manual?

Echo EG-10000 Specifications

General IconGeneral
BrandEcho
ModelEG-10000
CategoryPortable Generator
LanguageEnglish

Related product manuals