X7501186001 27
© 2/2016 ECHO Inc.
PB-250LN MAINTENANCE
1. Close choke (COLD START [ ]
position). This prevents dirt from
entering the carburetor throat
when the air filter is removed.
Brush accumulated dirt from air
cleaner area.
2. Remove air filter cover. Brush dirt
from inside cover.
3. Remove air filter and lightly brush
debris from filter. Replace filter if it
is damaged, fuel soaked, very
dirty, or the rubber sealing edges
are deformed.
4. If filter can be reused, be certain it:
• Fits tightly in he air filter cavity.
• Is installed with the original side out.
5. Install air filter cover.
Fuel Filter
Level 1.
Fuel is VERY flammable. Use
extreme care when mixing,
storing or handling, or serious
personal injury may result.
1. Use a clean rag to remove loose
dirt from around fuel cap and
empty fuel tank.
2. Use the “fuel line hook” to pull the
fuel line and filter from the tank.
3. Remove the filter from the line and
install the new filter.
Parts Required:
REPOWER
TM
AIR & FILTER KIT.
To Next Page
Loading...
