EasyManuals Logo
Home>Echo>Blower>PB-9010 H

Echo PB-9010 H User Manual

Echo PB-9010 H
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
PB-9010 H/T OPERATION
X7501200700 31
© 08/20 ECHO Incorporated
Always wear safety glasses, hearing protection and a face filter
mask or serious personal injury may result. Do not point the
blower pipe in the direction of people or pets.
Use reduced speed only when performing light-duty tasks or to
comply with local noise regulations. Continuous low speed operation
may allow fuel/oil residue to build-up on the piston and cause rapid
build-up of carbon on the spark arrestor screen, resulting in
overheating and engine damage. To reduce harmful build-up, run
engine at wide open throttle for at least 5 minutes every hour, and
inspect/clean the spark arrestor screen after approximately 40 hours
of operation.
Read the Safety Section carefully.
To avoid engine damage due to over-revving, do not block blower
pipe.
1. Use only during appropriate hours. Contact your local government for
the ordinances affecting your area.
2. To reduce sound levels, limit the number of pieces of equipment used
at any one time.
3. Allow the engine to warm up at a fast idle for a few minutes.

Other manuals for Echo PB-9010 H

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Echo PB-9010 H and is the answer not in the manual?

Echo PB-9010 H Specifications

General IconGeneral
BrandEcho
ModelPB-9010 H
CategoryBlower
LanguageEnglish

Related product manuals