Echo PB-9010 H

X7501200700
© 08/20 ECHO Incorporated
Operator’s
Manual
PB-9010 H/T
Power Blower
The engine exhaust from this product contains chemicals
known to the State of California to cause cancer, birth defects,
or other reproductive harm.
Read and understand all provided literature before
use. Failure to do so could result in serious injury.
This product complies with CAN ICES-2/NMB-2.

Echo PB-9010 H Specifications

General

Engine Displacement	79.9 cc
Air Volume	1110 CFM
Air Speed	220 MPH
Type	Backpack Blower
Air Volume at Nozzle	1110 CFM
Max Air Speed	220 MPH
Fuel Capacity	83.8 fl. oz.
Fuel Tank Capacity	83.8 fl. oz.

Summary

Introduction to the PB-9010 HT

Servicing Information and Support

Details regarding service, parts, and product registration for your ECHO blower.

Parts and Serial Number Identification

Locating and recording model and serial numbers for future reference and service.

Service and Product Support

Safety Guidelines and Warnings

Safety Alert Symbols and Keywords

Explanation of DANGER, WARNING, CAUTION, NOTICE, and prohibition symbols used in the manual.

International Safety Symbols

Personal Safety and Protective Gear

Operator Preparedness and Protection

Physical and Mental Condition

Ensuring the operator is physically and mentally fit for operating the equipment.

Personal Protective Equipment (PPE)

Requirements for eye, hand, hearing, breathing protection and proper clothing.

Specific Safety Precautions

Repetitive Stress Injury (RSI) Prevention

Work Area and Operational Safety

Equipment Safety and Handling

Emission Control Information

PB-9010 H Component Identification

PB-9010 H Parts List

PB-9010 T Component Identification

PB-9010 T Parts List

PB-9010 H Assembly

Install Blower Pipes and Stick Handle

Step-by-step instructions for assembling blower pipes and stick handle.

Blower Pipe and Handle Assembly (PB-9010 H)

PB-9010 T Assembly

Install Blower Pipes

Instructions for attaching blower pipes to the PB-9010 T model.

Blower Pipe and Throttle Cable Assembly (PB-9010 T)

General Operation Safety

Fuel and Oil Requirements

Fuel Handling Safety

Fuel Mixing Instructions

Starting Cold Engine

Cold Start Procedure

Steps for starting the engine from a cold state using choke and purge bulb.

Cold Engine Start and Warm-up

Starting Warm Engine

Stopping the Engine

Blower Operation Precautions

Engine Speed Control

Cold Weather Operation

Adjusting the Harness

Maintenance Overview

Maintenance Skill Levels

Grading system for maintenance tasks indicating difficulty and required expertise.

Maintenance Intervals Schedule

Air Filter Maintenance

Fuel Filter Maintenance

Spark Plug Maintenance

Spark Plug Inspection and Adjustment

Cooling System Maintenance

Cleaning Cooling System Components

Spark Arrestor Screen Maintenance

Exhaust Port Cleaning

Carburetor Adjustment

Idle Speed Adjustment

Throttle Cable Adjustment

Troubleshooting Engine Problems

Troubleshooting Operational Issues

Storage Precautions

Long Term Storage Procedure

Product Specifications

Product Registration