10
SPECIFICATIONS
MODEL -----------------------------------------------------PPT-230
Length (Standard) ----------------------------------------- 2.25 m (7 ft., 4.6 in.)
Length (Extended) -----------------------------------------3.43 m (11 ft., 3 in.)
Length w/extension ----------------------------------------4.95 m (16 ft., 3 in.)
Width--------------------------------------------------------.23 m (9.06 in.)
Height ------------------------------------------------------- .22 m (8.7 in.)
Weight (dry) ------------------------------------------------7.8 kg (17.2 lb.)
Engine Type ------------------------------------------------Air cooled, two-stroke, single cylinder gasoline engine
Bore ----------------------------------------------------------34.0 mm (1.34 in.)
Stroke-------------------------------------------------------- 28.0 mm (1.10 in.)
Displacement -----------------------------------------------25.4 cc (1.55 cu. in.)
Exhaust System --------------------------------------------Spark Arrestor Muffler
Carburetor --------------------------------------------------Zama diaphragm model RB w/primer bulb
Ignition System -------------------------------------------- CDI (capacitor discharge ignition)
Spark Plug --------------------------------------------------NGK BPM-8Y Gap 0.65 mm (0.026 in.)
Fuel ----------------------------------------------------------Mixed (Gasoline and Two-stroke Oil)
Fuel/Oil Ratio ----------------------------------------------- 50:1 two-stroke air cooled engine oil
Gasoline ----------------------------------------------------- 89 Octane unleaded. DO NOT use fuel containing methyl alcohol,
more than 10% ethyl alcohol or 15% MTBE.
Oil ------------------------------------------------------------ Power Blend
TM
Premium Universal 2-Stroke Oil
Fuel Tank Capacity ---------------------------------------- 0.55 lit. (18.6 US fl. oz.)
Starter System ---------------------------------------------- Automatic Recoil Starter
Clutch -------------------------------------------------------Centrifugal Type
Sprocket Type ---------------------------------------------- 6 tooth spur, 9.53 mm (3/8 in.) pitch
Power Transmission Shaft Assembly ------------------- Aluminum Extrusion
Gear Case Ratio --------------------------------------------1.5:1
Oiling System-----------------------------------------------Automatic
Saw Chain Oil Capacity -----------------------------------225 ml (7.6 oz.)
Handle ------------------------------------------------------- Right hand grip w/throttle trigger and lockout
Shoulder Harness ------------------------------------------ Standard
Idle Speed (RPM) ------------------------------------------ 2400 - 3200
Wide Open Throttle Speed (RPM) ----------------------- 10,000 - 12,000
Guide Bar and Saw Chain (91 VS) -----------------------254 mm (10 in.) ; 9.53 mm (3/8 in.) pitch
To Next Page
Loading...
Need help?
General