EasyManuals Logo
Home>Echo>Pole Saw>PPT-260

Echo PPT-260 User Manual

Echo PPT-260
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
POWER PRUNER
TM
OPERATOR'S MANUAL
17
STARTING WARM ENGINE
The starting procedure is the same as Cold Start except DO NOT close
the choke, and do not depress throttle trigger to wide open position.
WARNING DANGER
The attachment should not move at idle, otherwise serious personal
injury may result.
NOTE
If attachment moves, readjust carburetor according to “Carburetor
Adjustment” instructions in this manual or see your ECHO Dealer.
1. Stop Switch.
Move Stop Switch button (A) forward away from the STOP
position.
2. Primer Bulb
Pump primer bulb (C) until fuel is visible and flows freely in the
clear fuel tank return line. Pump bulb an additional 4 or 5 times.
3. Recoil Starter.
Lay the unit on a flat, clear area and firmly grasp right hand grip
with left hand. Do not depress throttle trigger. Pull the recoil
starter handle (D) until the engine fires.
NOTE
If engine does not start after 5 pulls, use Cold Start Procedure.
A
C
D

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Echo PPT-260 and is the answer not in the manual?

Echo PPT-260 Specifications

General IconGeneral
BrandEcho
ModelPPT-260
CategoryPole Saw
LanguageEnglish

Related product manuals