EasyManua.ls Logo

Echo SRM 1501 - User Manual

Echo SRM 1501
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Question and Answer IconNeed help?

Do you have a question about the Echo SRM 1501 and is the answer not in the manual?

Echo SRM 1501 Specifications

General IconGeneral
BrandEcho
ModelSRM 1501
CategoryTrimmer
LanguageEnglish

Summary

OPERATORS MANUAL

Primary Safety Warning

WARNING DANGER: Read instructions carefully and follow rules for safe operation to avoid serious injury.

DECALS

Shaft Decal - Blade Operation Safety

Key safety points for blade usage: kickout, bystander distance, and blade care.

Shaft Decal - General Safety

General safety advice on eye protection, avoiding contact, and manual importance.

OPERATION

Operator Safety Guidelines

Essential safety rules for operating the trimmer, including clothing, eye/hearing protection, and fuel handling.

Preparation for Use

Warnings about improper use and the necessity of proper clothing and safety gear.

Protective Equipment Requirements

Detailed guidance on wearing ANSI Z87.1 goggles, hearing protection, snug clothing, and non-skid shoes.

Blade Operation Safety and Selection

Safe practices for using blades, avoiding damage, and selecting the correct blade type.

Blade Operation Safety Precautions

Guidelines for blade use: stopping on impact, avoiding dull blades, and proper work area preparation.

HANDLING FUEL

Fuel Handling Safety Rules

Critical warnings for preventing fire or explosion during fuel handling, including no smoking and outdoor refueling.

MIXING FUEL

Fuel Mixing Procedure

Step-by-step guide for safely mixing fuel in a container.

STARTING AND STOPPING

Safe Starting Techniques

Pre-start checks and proper procedures for holding and pulling the starter rope.

Starting Cold Engine Warning

Warning about potential head rotation and initial steps for starting a cold engine.

Starting Cold Engine Procedure

Detailed steps for cold starting models 1501, 2301, and 2310 using choke.

Starting Warm Engine Procedure

Steps for starting a warm engine, including ignition and choke settings.

Stopping the Engine

Procedure for safely stopping the engine using the ignition switch and alternative methods.

TROUBLESHOOTING

Engine Fails to Start

Common causes and remedies for an engine that will not start, including fuel and ignition issues.

Engine Hard to Start

Troubleshooting steps for engines that are difficult to start, related to fuel mixture and choking.

SERVICE

CARBURETOR ADJUSTMENT

High Speed Adjustment

Steps for adjusting the HI speed screw for optimal full throttle performance.

CLEANING MUFFLER AND EXHAUST PORT

SERVICE PROCEDURES

ASSEMBLY

ASSEMBLY PROCEDURES

Installing Blade Adapter and Blade

Steps for installing metal blade adapter, Tri-Cut blade, or 8/80-tooth metal blade.

STORAGE

Long Term Storage Procedure

Guidelines for protective storage maintenance for units stored over 60 days.

Fuel System Preparation for Storage

Procedure for draining fuel tank and carburetor and oiling the cylinder for long-term storage.

SPECIFICATIONS

Related product manuals