Echo SRM-265T - Technical Specifications Overview

GRASS TRIMMER/BRUSH CUTTER
OPERATOR'S MANUAL
29
SPECIFICATIONS
MODEL ----------------------------------------------------SRM-265T
Length w/o cutter head ----------------------------------- 1810 mm (71.3 in.)
Width--------------------------------------------------------245 mm (9.65 in.)
Height -------------------------------------------------------340 mm (13.4 in.)
Weight (dry) w/o Cutter Head --------------------------- 5.75 kg (12.8 lb.)
Engine Type ------------------------------------------------ Air cooled, two-stroke, single cylinder gasoline engine
Bore----------------------------------------------------------34.0 mm (1.34 in.)
Stroke--------------------------------------------------------28.0 mm (1.10 in.)
Displacement -----------------------------------------------25.4 cc (1.55 cu. in.)
Exhaust ------------------------------------------------------Spark Arrestor Muffler w/catalyst
Carburetor -------------------------------------------------- Zama diaphragm model w/purge pump
Ignition System --------------------------------------------Flywheel magneto, capacitor discharge
Spark Plug -------------------------------------------------- NGK BPM-8Y (Gap 0.65 mm (0.026 in.)
Fuel ----------------------------------------------------------Mixed (Gasoline and Two-stroke Oil)
Fuel/Oil Ratio ----------------------------------------------- 50 : 1 Power Blend X™ ISO-L-EGD (ISO/CD 13738) and J.A.S.O.
M345- FC/FD, two-stroke, air-cooled engine oil.
Gasoline ----------------------------------------------------- Use 89 Octane unleaded. Do not use fuel containing methyl
alcohol, more than 10% ethyl alcohol or 15% MTBE. Do not use
alternative fuels such as E-20 or E-85.
Oil ------------------------------------------------------------Power Blend X
TM
Premium Universal 2-Stroke Oil
Fuel Tank Capacity ---------------------------------------- 0.50 lit. (16.9 US fl. oz.)
Starter System ---------------------------------------------- Automatic Rewind Starter
Clutch -------------------------------------------------------Centrifugal Type
Vibration Isolated System--------------------------------- Rubber cushion on engine mount (heavy duty). Rubber grip on
front handle
Operating Rod ---------------------------------------------- 25.0 mm aluminum Tube
Drive Shaft -------------------------------------------------6.35 mm (1/4 in.) flexible shaft
Gear Case Ratio ------------------------------------------- 1.4:1 Reduction
Rotating Direction -----------------------------------------Counter Clockwise; viewed from top
Cutter Head ------------------------------------------------- Nylon line head (2-line) with .095 Crossfire™ Line capacity 6m (20 ft.)
Handle ------------------------------------------------------- Front - Loop and Right Rear Handle w/rubber grips
Shoulder Harness ------------------------------------------ Optional
Idle Speed---------------------------------------------------2,600 - 3,200 RPM
Clutch Engagement Speed -------------------------------- 3,600 - 4,200 RPM
Wide Open Throttle Speed (W.O.T.) --------------------8,500 -12,000 RPM