EasyManuals Logo
Home>Echo>Trimmer>SRM-3020T

Echo SRM-3020T User Manual

Echo SRM-3020T
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
MAINTENANCE SRM-3020T
32 X7502350100
© 04/2018 ECHO Inc.
3
Low evaporative fuel tanks DO NOT require regular maintenance to
maintain emission integrity.
*Replacement is recommended based on the finding of damage or wear
during inspection.
Air Filter
Level 1
1. Close choke (COLD START position). This prevents dirt from entering
the carburetor throat when the air filter is removed. Brush accumulated
dirt from air cleaner area.
2. Remove air filter cover. Brush dirt from inside cover.
Assure throttle wire retaining clip
(A) remains in place as shown
when removing or installing air
filter cover.
3. Remove foam pre-filter (B) and
air filter and clean as indicated
below:
4. Foam Pre-filter.
Clean foam filter in water/
detergent solution and rinse
with clean water.
Wrap the filter in a clean, dry cloth and squeeze (do not wring) dry.
Allow to dry completely before reuse. Do not oil.
Air Filter
Parts Required: Tune Up Kit.
A
B

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Echo SRM-3020T and is the answer not in the manual?

Echo SRM-3020T Specifications

General IconGeneral
BrandEcho
ModelSRM-3020T
CategoryTrimmer
LanguageEnglish

Related product manuals