Gr a s s Tr i m m e r /Br u s h Cu T T e r
Op e r a T O r 's ma n u a l
21
s t a r t I n g w a r m e n g I n e
1. Press the decompression device (E).
2. Stop Switch
Move stop switch button (A) forward away from the STOP posi-
tion.
3. Purge Bulb
Pump purge bulb (C) until fuel is visible in the "Clear" fuel return
line.
4. Recoil Starter
Lay the unit on a at area and keep movable attachment parts clear
of all obstacles. Hold unit rmly and rapidly pull the recoil starter
handle (D) until the engine res.
NOTE
If engine does not start after 5 pulls, use Cold Start Procedure.
s t o p p I n g e n g I n e
1. Release throttle trigger and allow to run at an idle speed.
2. Slide ignition switch to “STOP” position.
E
A
D
C
D
To Next Page
Loading...
