EchoStar AD-3000 IP Viaccess - Page 13

12
Two Fixed Dishes using DiSEqC mode
1. Connect the IF OUT and LNB IN connectors using the loop through cable provided with the EchoStar AD-3000IP VIACCESS.
2. Connect the DiSEqC 1.0 or Toneburst switch to the LNB IN connector of the EchoStar AD-3000IP VIACCESS.
3. Connect both dishes to the 2 inputs from the DiSEqC switch.
LNBLNB
FIXED DISH # 1
(Digital or Analog)
FIXED DISH # 2
(Digital or Analog)
DiSEqC switch