EasyManua.ls Logo

EchoStar AD-3000 IP Viaccess - Digital Section; Specifications

EchoStar AD-3000 IP Viaccess
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
1. Tuner & channel
Input connector 1 x F type with loop through
Output connector 1 x F type 75 Ohm
Frequency range 950MHz to 2150MHz
Input impedance 75 Ohm
Signal level -25 to -65dBm
IF frequency 480MHz
IF bandwidth 36MHz
LNB power & polarization Vertical +13.5V - +14.5V
Horizontal +17.5V - +18.5V
22kHz tone Frequency 22kHz 2kHz
Amplitude 0.6Vp-p 0.2Vp-p
Demodulation QPSK
Input symbol rate 2 - 32Msps
FEC decoder Convolutional code rate
1/2, 2/3, 3/4, 5/6 and 7/8 with constraint
Length K=7
2. MPEG transport stream A/V decoding
Transport stream MPEG-2 ISO/IEC 13818
Transport stream specification
Profile & level MPEG-2 MP @ ML
Input T/S data rate 90Mbit/S max.
Aspect ratio 4:3, 16:9 with pan vector
Video resolution 720 x 576(PAL), 720 x 480(NTSC)
Audio decoding MPEG-1 Audio Layer 1 & 2, Musicam
Audio mode Stereo, Dual channel, Joint stereo, Mono
Sampling rate 32, 44.1 and 48kHz
3. Memory
Flash memory up to 2 Mbytes
Program DRAM up to 8 Mbytes
EEPROM 2 Kbytes
4. A/V & data in/out
SCART TV x 1, VCR x 1, Decoder x 1
RGB video output TV SCART
0/12V out RCA x 1
CVBS video out RCA x 1, SCART x 2 (TV, VCR)
6. Specifications
Digital Section

Related product manuals