EasyManua.ls Logo

EchoStar AD-3000 IP Viaccess - Page 30

EchoStar AD-3000 IP Viaccess
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
29
S/PDIF out RCA x 1
Analog audio out RCA x 2 (L-Ch x 1, R-Ch x 1), SCART x 2 (TV, VCR)
Resolution 16bit DAC
Output level 2Vrms max.
Volume & mute control
Data interface RS232C, Baud Rate 9600 - 115200, 9 Pin D-Sub
5. PCMCIA
Number of Slot 2
Type I, II DVB Common interface standard
6. Conditional Access
Embedded Viaccess 1 Smart Card Reader
7. RF-Modulator
RF-connect 75 Ohm, IEC169-2, male/female
Output Frequency 470MHz to 860MHz
Output channel Ch21 - 69
TV standard PAL D/K, PAL B/G , PAL I
8. Power supply
Input voltage AC90 - 240V, 50/60Hz (Receiver / Positioner)
Type Linear PWM
Power consumption 240W max.(below 7W max. for standby mode)
Protection Separate internal fuse and chassis grounding.
The input shall have lightning or electric shock protection.
9. Physical specification
Size(W x H x D) 370mm x 60mm x 280mm
Weight about 3 Kg
10. Environment
Operating temperature +5ºC - +40ºC
Storage temperature -40ºC - +65ºC
11. Positioner
Satellite position 50
Azimuth & Skew control 6 Push terminal
(M1, M2, M.Pulse, +5V, GND, Skew)
Output power 36VDC, 5A max. (during 5 minutes) (SMPS)
Sensor type Reed or Hall effect switch
Ferrite control 2 Push terminal(+,-)

Related product manuals