Ecler CA120 - Page 23

23
• For the CA120, there are 5 possible Input Names:
o LINE1
o LINE2
o MICL3
o LINE1_AND_MICL3
o LINE2_AND_MICL3
• And 6 in the case of the CA200z:
o LINE1
o LINE2
o LINE2
o LINE4
o MICRO1
o MICRO2
• <Preset Number> is a numerical value that identifies one available Preset stored
in the device’s memory. It can be within the [1..5] range.
• <Volume Level> are numerical values in the [0…64] range that define values in a
scale equivalent to [-inf...Maximum_Volume] in 1.25 dB steps.
• <Tone Level> are numerical values in the [-10…10] range that define values in a
scale equivalent to [-10, -8, -6, -4, -2, 0, 2, 4, 6, 8, 10] dB. If the numerical value is
not in this list, the unit will reply with an error message.
• <Increment Value> are numerical values in the [0…64] range that define a value
in a scale equivalent to [Increment Value]x(1.25) dB, used to increase or decrease
the current absolute value of a level.
• <Threshold Level> the allowed numerical values in this field are just 3 [20, 25, 30].
It defines a value in a scale equivalent to [20, 25, 30] dB below the nominal level
value for a given audio input. If the numerical value is not in this list, the unit will
reply with an error message.
• <Depth Level> the allowed numerical values in this field are just 4 [20, 30, 60, 80].
It defines a value in a scale equivalent to [20, 30, 60, 80] dB. If the numerical value
is not in this list, the unit will reply with an error message.
• <Attack Time Value> the allowed numerical values in this field are just 4 [50, 100,
200, 300]. It defines a value in a scale equivalent to [50, 100, 200, 300]
milliseconds. If the numerical value is not in this list, the unit will reply with an
error message.
• <Release Time Value> the allowed numerical values in this field are just 5 [300,
500, 1000, 2000, 3000]. It defines a value in a scale equivalent to [300, 500, 1000,
2000, 3000] milliseconds. If the numerical value is not in this list, the unit will reply
with an error message.