Ecler CA120 - Page 33

33
CA200z AMPLIFIER
TYPE
PARAM1
PARAM2
PAR
AM3
PARAM4
DESCRIPCIÓN
GET
ALL
Dumps current device status (with DATA messages)
POWER
Gets the current POWER status
PRESET_NUMBER
Gets the current PRESET number
OUTPUT_MODE
Gets the current amplifier OUTPUT MODE
ZONE_LABEL
<Zone Label>
<Zon
e>
Gets the current LABEL (name) for the specified ZONE
MUTE
<Zone>
Gets the current MUTE status for the specified ZONE
MASTER_VOL
<Zone>
Gets the current MASTER VOLUME for the specified ZONE
INPUT
<Input Name>
<Zon
e>
Gets the status (ON/OFF) for the specified INPUT at the specified
ZONE
VOL
<Input Name>
<Zon
e>
Gets the current VOLUME for the specified INPUT at the specified
ZONE
BASS
<Input Name>
<Zon
e>
Gets the current BASS LEVEL for the specified INPUT at the specified
ZONE
TREBLE
<Input Name>
<Zon
e>
Gets the current TREBLE LEVEL for the specified INPUT at the
specified ZONE
GATE
<Micro Name>
Gets the current NOISE GATE status (ON or OFF) for the specified MIC
INPUT
GATE_THRESHOLD
<Micro Name>
Gets the current NOISE GATE THRESHOLD LEVEL for the specified
MIC INPUT
TALKOVER_ASSIGN
<Micro Name>
Gets the current TALKOVER ASSIGN for the specified MIC INPUT
TALKOVER_PRIORITY
<Micro Name>
Gets the current TALKOVER PRIORITY for the specified MIC INPUT
TALKOVER_
THRESHOLD
<Micro Name>
Gets the current TALKOVER THRESHOLD LEVEL for the specified MIC
INPUT
TALKOVER_ATTACK
<Micro Name>
Gets the current TALKOVER ATTACK TIME for the specified MIC
INPUT