Ecler CA120 - Page 53

53
COMPRESSOR_KNEE
<Zone=ZA:ZD>
Gets the current COMPRESSOR KNEE mode (SOFT or HARD) for the specified
output zone
COMPRESSOR_GAIN
<Zone=ZA:ZD>
Gets the current COMPRESSOR GAIN (dBx10) for the specified output zone
DELAY_ACTIVE
<Zone=ZA:ZD>
Gets the current DELAY status (ON or OFF) for the specified output zone
DELAY_TIME
<Zone=ZA:ZD>
Gets the current DELAY TIME (milliseconds x10) for the specified output zone