3
Eclipse Veri-Flame Instruction Manual 818 -6/06
auDienCe
sCope
DoCument
Conventions
This manual has been written for the people who select and install the product
and the technicians who work on it. They are expected to have previous experi-
ence with this kind of equipment.
This manual contains essential information for the proper installation and opera-
tion of the Eclipse Veri-Flame Burner Monitoring System.
Following the instructions in this manual should assure trouble-free installation and
operation of the monitoring system. Read this manual carefully. Make sure that
you understand its structure and contents. Obey all the safety instructions.
Do not deviate from any instructions or application limits in this manual without
written consent from Eclipse Combustion, Inc.
If you do not understand any part of the information in this manual, do not
continue. Contact your Eclipse sales ofce or Eclipse Combustion, Inc., Rock-
ford, Illinois.
There are several special symbols in this document. You must know their mean-
ing and importance.
The explanation of these symbols follows. Please read it thoroughly.
Danger:
Indicates hazards or unsafe practices which WILL result in severe
personal injury or even death.
Only qualied and well trained personnel are allowed to carry out
these instructions or procedures.
Act with great care and follow the instructions.
Warning:
Indicates hazards or unsafe practices which could result in severe
personal injury or damage.
Act with great care and follow the instructions.
Caution:
Indicates hazards or unsafe practices which could result in damage to the machine
or minor personal injury.
Act carefully.
Note:
Indicates an important part of the text.
Read the text thoroughly.
About this manual
To Next Page
Loading...
Need help?
General
