26
Other information
Symptoms Causes Remedies
MP3/WMA playback
Disc cannot be played
back.
No MP3/WMA tracks are recorded on the
disc.
Change the disc.
MP3/WMA tracks do not have the
extension code <.mp3> or <.wma> in their
file names.
Add the extension code
<.mp3> or <.wma> to their file
names.
MP3/WMA tracks are not recorded in the
format compliant with ISO 9660 Level 1,
Level 2, Romeo, or Joliet.
Change the disc.
(Record MP3/WMA tracks
using a compliant
application.)
Noise is generated.
The track played back is not an MP3/WMA
file (although it has the extension code
<.mp3> or <.wma>).
Skip to another track or
change the disc. (Do not add
the extension code <.mp3> or
<.wma> to non-MP3 or WMA
tracks.)
A longer readout time is
required ("CHECK" keeps
flashing on the display).
Readout time varies due to
the complexity of the folder/
file configuration.
Do not use too many
hierarchies and folders.
Tracks cannot be played
back as you have
intended them to play.
Playback order is determined when the files
are recorded.
————————————
Elapsed playing time is
not correct.
This sometimes occurs during play. This is
caused by how the tracks are recorded on
the disc.
————————————
"NO FILES" appears on
the display.
The current disc does not contain any MP3/
WMA tracks.
Insert a disc that contains
MP3/WMA tracks.
Correct characters are not
displayed (e.g. album
name)..
This receiver can only display alphabets
(capital: A - Z), numbers, and a limited
number of symbols
————————————
To Next Page
Loading...
Need help?
General
